Non-PoE Gigabit Ethernet Surge & Lightning Protector | iTechCables
$44.00 $65.07
These non-PoE Gigabit Ethernet surge & lightning protector protects important network devices from extreme lightning strikes, electronic static discharge, and electrical fast transient bursts. They are usually installed in-between connecting network cables and central network and controller devices.
You can buy them at iTechCables at the best lowest prices. We deliver your orders at your doorsteps in minimum time. Our Ethernet surge and lightning protectors are tested and certified products. Therefore, you can buy them with confidence.
Electrical Specifications |
||
|
Low Capacitance TVS Diodes Array |
ESD IEC 61000-4-2
EFT IEC 61000-4-4 Lightning IEC 61000-4-5 |
15 kV (Air), 8kV (contact) 40 A (5/50ns)
12 A (8/20µs) |
| Peak Pulse Power (tp.=8/20µs) | 300 Watts | |
| Peak Pulse Current (tp.=8/20µs) | 12 A | |
| Reverse Stand-Off Voltage | 5 V Max. | |
| Reverse Breakdown Voltage | 6 V Min. (It=1mA) | |
| Reverse Leakage Current | 5 µA (VRWM=5V, T=25ºC) | |
| Forward Voltage | 1.2 V (If=15mA) | |
|
Clamping Voltage |
12.5 V @ 1A, tp.=8/20µs
17.5 V @ 5A, tp.=8/20µs 25 V @ 12A, tp.=8/20µs |
|
| Junction Capacitance | Typical: 3pF; Max. 5pF | |
|
Protection Thyristors |
Voltage off State | 58 VDRM @ 5 µs |
| Voltage Break over | 77 Vs. @ 100 V/µs | |
| Voltage On State | 5 V | |
| Current Hold | 150 mA | |
| Current Peak Pulse | 400 A (8/20µs) | |
| Current Peak Pulse | 100 A (8/1000µs) | |
| Capacitance (@1MHz, 2V Bias) | 85pF max. | |
| 55pF min. | ||
|
Miniature 3-Pole Gas Discharge Tube |
DC Spark over ±20%@100V/s | 150 V |
| Impulse Spark over | 350 V (100 V/µs) | |
| 500 V (1000 V/µs) | ||
| Impulse Transverse Delay | <75 ns (100 V/µs) | |
| Insulation Resistance | >1010 Ω (100 V) | |
| Glow Voltage | ~70 V (10 mA) | |
| Arc Voltage | ~10 V (1 A) | |
| Capacitance | < 2pF (1 MHz) | |
| DC Holdover Voltage | < 150 ms. (80 V) | |
| Impulse Discharge Current | >10 Operations (1000A, 8/20µs) | |
| Climatic Category (IEC 60068-1) | 40/90/21 | |
|
Overcurrent Protection Switch (Voltage: 30 V max., AC or DC) |
Hold Rated Current | 1.1 A @ 23°C. Hold |
| Current Ratings | 1.1 A Hold & 2.2 A Trip @ 23°C. | |
| Initial Resistant Values | 0.1Ω Min., 0.18Ω Max. @ 23°C. | |
| Time to Trip | 6.6 Seconds @ 5.5A @ 23°C. | |
| 1hr Post-Trip Resistance Std. Trip | 0.27 Ω @ 23°C. | |
| Tripped-State Power Dissipation | 0.70W @ 23°C Nom. | |
